ANDYGRAPH POSER 4 FILE !!!!!
- maax
- Posts: 198
- Joined: Fri Jun 14, 2002 6:52 pm
- Location: Toronto
- Contact:
ANDYGRAPH POSER 4 FILE !!!!!
I've been spending the last few days cleaning up and rebuilding the Andygraph Poser Files I managed to get my hands on. (Not sure if they were Andygraph's final files for his MK1 figure. ) After getting all the work done, I've zipped the files and uploaded them into my A.I. Directory.
http://webhome.idirect.com/~aarmy/A.I./
http://webhome.idirect.com/~aarmy/A.I./Andygraph.zip
The file is 8 megs, and unloads to 25 meg, but have everything you need for a single Andygraph Figure. The MK1 is a P4 Female. Andygraph is working on a Victoria 2 figure, but the project isn't done yet.
ENJOY
MAAX
- Barbarella
- Posts: 202
- Joined: Thu Sep 05, 2002 6:35 am
- x 41
- Contact:
Is that the same one as this?
Cause i cant get the entire effect of the covered body, theres always intenrals showing...
Cause i cant get the entire effect of the covered body, theres always intenrals showing...
On DeviantArt - https://www.deviantart.com/liavenuto
Admin of the ASFR FTP Server
Admin of the ASFR FTP Server
- maax
- Posts: 198
- Joined: Fri Jun 14, 2002 6:52 pm
- Location: Toronto
- Contact:
Solid outside
When you want to do the outside without the internals showing, you need to go into the Materials Section. (Under Render) and change the skin texture of the main figure. Move the transparency Max and Mins to 0%, then change the Transparency Map to None.
MAAX
MAAX
- kb7rky
- Posts: 1228
- Joined: Sun May 26, 2002 11:38 am
- Location: Lewiston, Idaho
- Contact:
Maax:
Dumb question that only *YOU* can answer:
Is this an actual Poser 4 file, or Poser 4 render?
Dumb question that only *YOU* can answer:
Is this an actual Poser 4 file, or Poser 4 render?
C'mon over & check out my other webpage:
The First Church Of Buster
And, the homepage:
Mythbusters Fan Club.com
The First Church Of Buster
And, the homepage:
Mythbusters Fan Club.com
- Barbarella
- Posts: 202
- Joined: Thu Sep 05, 2002 6:35 am
- x 41
- Contact:
It's a poser 4 file, unzip it into the main Poser 4 folder then go to the figures menu and youll see the andygraph folder...
Double click to open it and replace the existing character then render it...save the image and you have a new pic, been having a bit of fun with it myself. I've been a bit busy making other wallpapers though...
Like this one...
http://www.stcd.sgnonline.com/pics/wall ... roblem.jpg
With good lighting the pic i posted above is the kind of renders you will expect from the file...damn nice work on AndyGraph's part, i aint seen him in the renderosity chat room for a while so i can only assume he's busy with the Poser 5 version. It's Poser 5 i normally use, the link i posted is an idea of the renders that Poser 5 can do but for some reason i cant get the andygraph files to work in P5 Luckily enough i still have Poser 4 Pro on a disk, so i used that instead...
Thanks Maxx for posting the file
Double click to open it and replace the existing character then render it...save the image and you have a new pic, been having a bit of fun with it myself. I've been a bit busy making other wallpapers though...
Like this one...
http://www.stcd.sgnonline.com/pics/wall ... roblem.jpg
With good lighting the pic i posted above is the kind of renders you will expect from the file...damn nice work on AndyGraph's part, i aint seen him in the renderosity chat room for a while so i can only assume he's busy with the Poser 5 version. It's Poser 5 i normally use, the link i posted is an idea of the renders that Poser 5 can do but for some reason i cant get the andygraph files to work in P5 Luckily enough i still have Poser 4 Pro on a disk, so i used that instead...
Thanks Maxx for posting the file
On DeviantArt - https://www.deviantart.com/liavenuto
Admin of the ASFR FTP Server
Admin of the ASFR FTP Server
- maax
- Posts: 198
- Joined: Fri Jun 14, 2002 6:52 pm
- Location: Toronto
- Contact:
Andygraph's work
Actually Andygraph is in the middle of doing his Mk2, which is based on Victoria rather than Posette. The exterior is familiar Andygraph, but the inside is an entirely new set of internals. Currently he's got the Torso, Head and legs done for the Mk2. I've posted a picture of the Mk2 with internals showing (This is an official Andygraph image, not something I did, I don't have the entire Mk2 File yet.), with thanks to Kishin for sending me the image.
http://home.primus.ca/~aarmy/ASFR/Softg ... 15534c.jpg
MAAX
P.S. Kishin, did that object file I sent you allow you to use the Mk2 files you have? - MAAX
http://home.primus.ca/~aarmy/ASFR/Softg ... 15534c.jpg
MAAX
P.S. Kishin, did that object file I sent you allow you to use the Mk2 files you have? - MAAX
- kb7rky
- Posts: 1228
- Joined: Sun May 26, 2002 11:38 am
- Location: Lewiston, Idaho
- Contact:
Unfortunately, I don't have Poser 4 anymore...some lucky ASFRian bought it from me sometime back. I just couldn't make it work like it was supposed to...oh well. Maybe with some practice (and another P4 or the rumored P5), I might try again.Barbarella wrote:It's a poser 4 file, unzip it into the main Poser 4 folder then go to the figures menu and youll see the andygraph folder...
C'mon over & check out my other webpage:
The First Church Of Buster
And, the homepage:
Mythbusters Fan Club.com
The First Church Of Buster
And, the homepage:
Mythbusters Fan Club.com
Users browsing this forum: No registered users and 42 guests